Philips S7000 series Bedienungsanleitung Seite 39

Problem
The shaver is not
fully charged
after I charge it
in SmartClean
system.
Possible cause
The battery of the
shaver is not
charged sufficiently.
The cleaning
cartridge needs to
be replaced.
You have used
another cleaning
fluid than the
original Philips
cleaning cartridge.
The hole of the
drain of the
cleaning cartridge is
blocked.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
Apple, the Apple logo, iPad, and iPhone are
trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of
Apple Inc.
Solution
If the battery of the shaver
is not charged sufficiently,
the SmartClean system
may not work properly. The
shaver needs to be able to
switch on briefly during the
rinsing phase. Charge the
shaver for a short time
before you use the
SmartClean system to
clean your shaver.
Replace the cleaning
cartridge.
Only use the original
Philips cleaning cartridge.
Remove the cartridge from
the SmartClean system and
push the hairs down the
drain with a toothpick.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
41
English