Yamaha mLAN16E Bedienungsanleitung Seite 16

■ The computer processing speed is too slow.
■ The computer's CPU meter indicates a heavy processing load.
■ Playback response is delayed.
• Make sure your computer satisfies the system requirements.
• (For Windows) If you do not use the mLAN system, on the task bar right-click mLAN Manager
( ), then select OFF (mLAN quits).
• Try reducing the number of audio channels in mLAN Auto Connector or Graphic Patchbay.
• Try increasing the latency value.
• (For Macintosh) If a dual-CPU model awakes from Sleep or Suspend mode, processing speed
may be slowed. In this event, restart the computer.
• (For Windows) Refer to "Hints when using audio data (Windows)."
• (For Windows) The condition may improve if you set "Hyper Threading" to "Disable."
• Using mLAN Graphic Patchbay, try reducing the number of devices connected to the com-
puter.
• (For Macintosh) Turn off virtual memory.
• (For Macintosh) Disable Apple Talk.
■ Inconsistency in wordclock, or unable to exit from Auto Connector
• (For Windows) Mobile computers with Intel CPU
SpeedStep™ technology is applied for some CPU's (CPU for notebook PC). Please disable the
SpeedStep™ technology when mLAN is employed. SpeedStep™ technology changes CPU
clock dynamically depending on the loading on the CPU to save the power consumption.
- How to disable the SpeedStep™ technology;
In almost all of the PC's, BIOS has a function to select enabling or disabling the SpeedStep™
technology. Please refer to the PC's operating manual, or make inquiry to the PC manufac-
turer.
■ Unable to close the application or operating system
■ Unable to change the mLAN settings
■ Unable to uninstall mLAN Applications for Yamaha or mLAN Tools 2.0
• (For Windows) Is the mLAN (WDM) driver selected as the default audio device for the system?
- Select [Start | Control Panel | Sounds and Audio Devices | Voice].
Make sure that something other than "mLAN Audio 01" is selected for the [Voice playback]
and [Voice recording] settings.
- Select [Start | Control Panel | Sounds and Audio Devices | Audio].
Make sure that something other than "mLAN Audio 01" is selected for the [Sound play-
back] and [Sound recording] settings.
- In "MIDI music playback," select any option other than the range of options from "mLAN
MIDI Out" through "mLAN MIDI Out (8)."
• (For Windows) Select [Start | Control Panel | Sounds and Audio Devices | Sounds]. And select
"No sounds" in the [Sound scheme], then execute again.
• (For Windows) If you cannot quit mLAN (by selecting "OFF" after right clicking the mLAN icon
in the task bar), end the processes listed below manually. ([Ctrl] + [Alt] + [Delete] → [Processes]
→ select process → [End process]) When finished, start mLAN Manager to change the mLAN
settings again.
16
.....................................Refer to "System Requirements" in the Installation Guide.
.............................Refer to "Confirming the installation" in the Installation Guide.
.......Refer to "Connecting the Computer and mLAN devices via mLAN" in the
Installation Guide and "mLAN Connection Settings" in the mLAN Graphic
Patchbay Online Manual.
..........Refer to "Changing the Settings after Installation" in the Installation Guide.
.......Refer to the Installation Guide.
.......Refer to "mLAN Connection Settings" in the mLAN Graphic Patchbay Online
Manual.