Cleaning And Maintenance - Concept RK2046 Bedienungsanleitung

EN
3. Connect the base to the mains.
4. Turn the kettle on by pushing the switch button.
The operation is signaled by the operating light on the kettle body (Fig. 1). The
kettle lid should be closed properly while heating water.
5. A fter the boiling point has been reached, the kettle will turn off automatically, and
the operating light will go out. Water heating can be terminated prematurely by
moving the switch to the off position, or by removing the kettle from the base.
6. Remove the kettle from the base and use the water (Fig. 2).
7. If you want to reheat water you have just finished boiling, wait approximately
30 seconds before activating the switch.
8. A ny impurities are caught by the filter while pouring.
Note: If a few drops of water appear at the base after use, this is not a defect. It is a
small amount of condensed steam, which deactivates the kettle thermostat.

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any
detergents or hard objects as they may damage the unit's surface!
Never clean the unit under running water, do not rinse it, and do not submerge
it in water!
REMOVAL OF LIMESCALE
Impurities from water collect during normal use. These sediments can be removed
from the kettle perfectly by using preparations designed for removing limescale (see
the producer's instructions), or applying the following procedure:
1. Pour three cups of vinegar into the kettle and fill the rest of the way with water.
Leave the solution in the kettle overnight. Do not boil!
2. Pour out the contents, and clean remaining sediment using a wet cloth. Fill the
kettle with clean water, boil it and pour out again. Repeat the procedure. The
kettle is then ready for operation.
Note: Remove the sediment inside the kettle regularly, at least once a week,
depending on the water hardness and frequency of use. Deposits reduce the heating
effect and life of the kettle considerably.
SERVICE
Any greater maintenance or repairs requiring intervention into the internal parts of the product shall only be performed
by the authorized service.
RK2046
Fig. 2
23