Product Description - Concept RK2046 Bedienungsanleitung

• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Use the product only for the intended purpose specified in the Operating Manual.
• Do not immerse the power cord, plug, or appliance into water or any other liquid.
• Use only accessories recommended by the manufacturer.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

1. Lid
2. Kettle body
3. Watermark
4. Button to open the lid
5. Handle
6. Switch
7. Operating light
8. Supply cable base
NOTE
Prior to first use we recommend boiling the maximum volume of water in the kettle at least 3 times, then pouring it out.
The kettle is then ready for operation.
The kettle may only be used with the supplied base.
OPERATING INSTRUCTIONS
1. Remove the kettle from the base and fill it with cold water. Do not exceed the
maximum level!
If the water level in the kettle does not reach the recommended minimum, the
kettle will overheat and turn off prematurely.
Note: Make sure that the lid is closed properly. The kettle cannot turn off
automatically if this is not the case.
2. Return the kettle to the base. The electric contacts will be connected automatically.
The design of the center connector allows you to turn the kettle 360°. The kettle can
be put on the base from any side.
22
4
1
2
8
EN
5
3
7
6
Fig. 1
RK2046