TIGEX EXPRESS Bedienungsanleitung Seite 14

2
3
4
5
6
Fold down the lid once the container completely cool down to protect the container from dust and kitchen splashes for optimal
hygiene
7/ If you want to keep warm a small feeding-bottle or a small jar, simply close the lid
CAUTION: Always check the temperature of the bottle or small jar before feeding your baby.
Cleaning the bottle warmer:
Always unplug the appliance and wait for it to completely cool down before cleaning.
Use a damp cloth to clean the inside and outside of the tank (g). Never immerse the tank (g) in water.
Do not use abrasive products.
The baby food jar tray (a), heating accelerator ring (b), wide-necked bottle holder (c) and measuring cup (d) can be cleaned with
a sponge using soap and water or put into the top tray of a washing machine.
Descaling the tank:
Depending on the quality of the water used, a limescale deposit may build up on the bottom of the tank (g) over time.
Regularly descale your appliance by pouring a mixture consisting of 100ml of water and 100ml of white vinegar into the tank (g).
Leave for around 30 minutes before emptying the tank (g) and wiping it with a damp cloth.
Do not use detergents.
To take advantage of the 2-year guarantee on this product and obtain a replacement, please read the information on the atta-
ched guarantee coupon.
2/ Never warm up a bottle directly in the bottom of the aluminium tank. Always use the tray (a)
or the wide-necked bottle holder (c): see diagram on page 3, 4 and 5.
To heat baby food jars (without the lid) use the tray (a).
To warm bottles with standard necks (slightly loosened ring), use the tray (a).
To warm wide-necked bottles (slightly loosened ring), place the wide-necked bottle holder (c)
feet-first into the bottom of the tank (g) and then place the bottle into the holder (c).
3/ If the bottle's diameter allows it, add the heating accelerator ring (b) to the tank
(g).
Tigex tip:
In order to avoid spreading bacteria, prepare and heat bottles and baby food jars just before
meal time. Never keep an unfinished bottle.
It is recommended to refrain from warming food for long periods.
4/ * HOME USE
Plug in the appliance at the mains using the mains cable (h). Turn the switch
at the back of the appliance (k) to the Home position.
* CAR USE
Connect the car adapter lead (j) into the back of the appliance and flick the
switch at the back (k) into the Car position. Then connect the lead (j) into your
car's cigar-lighter.
5/ / Press the ON switch (e) to start the warming cycle. The light will be activated (f ).
The ON switch (e) cannot be used to turn the appliance off.
The appliance will turn off automatically once the warming cycle is complete.
CAUTION: the steam that is released during heating is very hot. Do not put your hand close to the
appliance while it is in use.
CAUTION: The lid of the bottle warmer must always be open while heating bottles and small jars.
6/ Without delaying, carefully remove the bottle or baby food jar and then turn
the switch (k) at the back of the appliance to the OFF position.
You may now unplug the appliance.
For a bottle: screw the ring back on properly and then shake well to ensure
even distribution of the contents. Pour a few drops of the liquid on to the back
of your hand to test the temperature.
For a baby food jar: stir the contents and test the temperature.
Make sure that the appliance has cooled down before cleaning it or putting it away.
To facilitate stowing, hooks (i) have been fitted at the back of the appliance to wrap the cable
(h).
13
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF