Maintenance - Chicco Multiride Gebrauchsanleitung

with your child.
• Make sure that the person using
the stroller knows how to operate
it in the safest way.
• The product must only be assem-
bled by an adult.
• This product must only be used by
an adult.
• To avoid all strangulation hazards,
never give children objects with
cords or strings attached, or leave
them close to such objects.
• Never use the stroller on staircases
or escalators: you could suddenly
loose control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller is left exposed to di-
rect sunlight for an extended pe-
riod of time, allow it to cool down
before placing your child inside.
Prolonged exposure to direct sun-
light may cause the colour of the
materials and fabric to fade.
• Prevent the stroller from coming
into contact with salt water. It may
cause rusting.
• Do not use the stroller on the beach.
• When not in use, the stroller should
be kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
WARNING: This product requires regular periodical mainte-
nance. The cleaning and maintenance of the product must
only be carried out by an adult.
CLEANING
Clean the fabric parts using a wet terry towel and neutral soap.
The stroller seat lining can be removed (please refer to the sec-
tion "REMOVING SEAT LINING"). Please refer to the care labels
for instructions on how to clean the fabric parts. The washing
symbols and relative meanings are indicated below:
Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Routinely wipe clean plastic parts with a soft damp cloth.
Never use solvents or abrasive products. To prevent the for-
mation of rust, always dry metal parts if they have come into
contact with water.

MAINTENANCE

If necessary, lubricate the moving parts with dry silicone lubri-
cant. Regularly check the condition of the wheels and clean
off all dust and sand. To avoid friction that may compromise
the correct functioning of the stroller, make sure that all plastic
parts that slide on the metal tubes are free of dust, dirt and
sand. Keep the stroller in a dry place.
LIST OF COMPONENTS
- Frame
- 2 rear wheels
- 2 front wheels
- Bumper bar
- Hood
- Storage basket
- 2 shoulder straps and one crotch strap (comfort kit)
- Leg cover
- Rain cover
NB: the elements described may not be available for some
versions of this product. Please carefully read the instructions
on the accessories/components available for the model pur-
chased.
OPENING AND FIRST ASSEMBLY
1. Open the closing device (Fig. 1) and completely open the
stroller frame until you hear a click (Fig. 1A - 1B).
2. Fit the front wheel into the appropriate hole until you hear
a locking click (Fig. 2). Repeat the operation for the other
front wheel.
3. Fit the rear wheel by inserting the pin in the dedicated hole
(Fig. 3). Repeat the same operation for the other rear wheel.
WARNING: Before use, ensure that the wheels are locked cor-
rectly.
4. To mount the hood to the stroller's frame insert the metal
rod into the hole positioned under the handle (Fig. 4), attach
the elastic strap to the hook (Fig. 4A) and slide the hood joint
into position (Fig 4B). The rear fabric section of the hood can
be fastened to the back of the seat using the velcro fasteners
provided (Fig. 4C-4D).
WARNING: The canopy must be fixed to both sides of the
stroller.
Ensure that the hood is correctly secured into position.
5. To adjust the hood, pull and/or push it centrally (Fig. 5). The
hood can be extended by opening the zip (Fig. 5A-5B). To
remove the hood from the frame, carry out the procedure
shown in point 4 in the reverse order.
WARNING: Keep the hood out of reach of children when it
is not in use.
6. Insert the bumper bar in the dedicated slots until they click
into place (Fig. 6). To remove the bumper bar, press the two
side buttons and pull towards you (Fig. 6A).
WARNING: Never use the bumper bar to lift the product with
12