Sony DSBK-110 Bedienungsanleitung Seite 14

Installation
7
Fasten the cable in the right-
side clamp as seen from the
front of the DSR-60/60P, then
stow the noise filter and the
slack portion of cable neatly in
the partitioned space.
8
Reattach the board retainers (1)
and (2) removed in step 1, then
the top cover of the DSR-60/
60P.
The board retainer (1) has six
pairs of tongues. Position the
retainer so that each pair of
tongues holds the upper edge
of the corresponding board.
14
Clamp
Noise filter
Partitioned space
Board retainer (1)
Board retainer (2)
Screw
Screw
Screw