Installation
Fitting Procedure
1
Remove the top cover from the
DSR-60/60P, then remove the
board retainers (1) and (2).
2
Insert the SDI-26A board to
the slot in the DSR-60/60P (as
illustrated in the right figure).
3
Insert the cable connected to
the board into the slit in the top
of the board slot frame near the
rear panel of the DSR-60/60P.
12
Top cover
Screw
Screw
DSR-60/60P
Push down the levers at both ends, and
with both hands press the board firmly
into position.
Board retainer (1)
Screw
Board retainer (2)