Maintenance And Cleaning; Environment Protection - Jata electro V142 Bedienungsanleitung

• If the plate is broken, switch off the appliance to avoid risk of
short-circuit.
• Do not place over the plates metallic objects such knifes, forks
and spoons.
• This appliance has been designed for domestic use only.
• VERY IMPORTANT: Do not immerse the main body and/
or the cable cord of the appliance in water or any other
liquid.
• To unplug, pull from the plug, never from the cable.
• It is absolutely normal for the appliance to make some smoke
during the first few times it is used due to the coatings used in
the manufacturing process of the product.
• This appliance is not intended for using with an external timer or
a separate system of remote control.
• The cleaning and maintenance done by users, can not be done
by children without any supervision, unless they are over 8 years
and they are under supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
• Place the appliance on a flat and heat resistance surface.
• Plug it to the mains and place the thermostat knob (2) in its maximum position (nº 5). The indicator (3) will light
on and the plate starts to heat.
• It is advisable to put the thermostat knob in the highest position (nº 5), to let the plate reach, as soon as possible,
a good temperature.
• Once reached the desired temperature, turn the thermostat knob (2) anticlockwise until the indicator light (3) is
off. The thermostat will keep the selected temperature.
• Please have in mind that the plate remains hot for a time after switched it off, you can switch off the cooker
before finishing the cooking, that suppose a energy saving.
• Once the cooking is finished place the thermostat knob (2) in the "0" position and unplug the appliance form
the mains.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, unplug the appliance from the mains and wait until the plate is totally cold.
• You can clean the body with a slightly dampened cloth.
• To clean the plate it is enough to use a slightly dampened cloth with soap. You also can clean the plate with
special products to clean vitro ceramic plates.
• If there are some hard residues you can use a scraper suitable for vitro ceramic hobs.
• Do not use abrasive or chemical products, metallic scourers, and such may deteriorate the surfaces.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
10