Turning The Appliance On/Off - BOMANN EBK 965 Bedienungsanleitung

Do not use cookware made from conventional stainless steel, glass, ceramic, copper, or aluminum.

Turning the appliance on/off

Press the on/off button on the control panel to turn on the appliance. After turning it on, a beep will sound and all the displays will show "-" or "--". The
appliance is now in standby mode.
NOTE:
• If you do not select a function within one minute, the appliance will switch off automatically.
• The cooking zone can be turned off at any time by pressing the on/off switch.
Turning a cooking zone on/off
• Place suitable cookware onto the cooking zone to be used. Ensure that the surface of the cooking zone and the bottom of the cookware are clean
and dry.
• Select at the control panel the desired cooking zone by the cooking zone selection buttons. The power setting "0" is flashing.
• Set the desired heating setting from 1 to 9 with the (+) or (-) button. First the power setting "5" is displayed. By pressing the (+) or (-) button, the
setting is changed continuously.
• To switch off a cooking zone, select the corresponding cooking zone by the selection buttons and press the button (-) until the power level "0" is
indicated. You can also press the (+) and (-) buttons at the same time to reset the power to setting 0 and the cooking zone will be turned off.
NOTE:
The power settings can be changed at any time during cooking.
Using the timer to turn one cooking zone off
You can use the timer to automatically turn off one cooking zone after a set duration.
• Select the respective cooking zone that you would like to set the timer for. Set the desired power setting with the (+) or (-) button.
• Press the timer button. The minute indication flashes "10" and the timer can be set.
• Make an adjustment of between 1 and 99 minutes with the button (+) or (-).
• With each push of the (+) or (-) button, the set time will change by one minute. By pressing the (+) or (-) button, the set time will be changed in
10-minute increments.
• After setting the timer, the minute indication flashes for a few seconds. A red dot next to the power level indicates that a timer is set for this cooking
zone. The minute indication shows the remaining time.
NOTE:
• Follow the operating sequence described above.
• The power setting of the cooking can be changed in timer mode without changing the time setting.
• The timer function is canceled with the switching off of the appliance.
• Following expiry of the set time, the cooking zone will switch off automatically. A beep will sound.
Using the timer as minute minder
NOTE:
• The timer as a minute minder timer does not activate the automatic switch-off of a cooking zone. It is merely a reminder function during cooking.
• The selection of a cooking zone is not required.
• Press the timer button. The minute indication flashes "--" and the timer can be set.
• The setting of the timer as a minute minder is done as described under "Using the timer to turn one cooking zone off".
• After expiry of the set time, a beep will sound for about 30 seconds and the display will show "--".
Delete the timer settings
Select the timer via the timer button and press the button (-) until the minute indication shows "0". You can also press the (+) and (-) button at the same
time to switch off the timer and the minute indication shows "--".
18 18
Only use cookware with a completely even bottom.
The bottom of the cookware should sit in the center of the cooking zone and have a
diameter of at least 140 mm.
To prevent scratches, do not slide the cookware across the cooking zone, but lift it.