Device Description; Control Panel; Scope Of Delivery; Overheating Protection - BOMANN EBK 965 Bedienungsanleitung

Einbau induktions kochfeld

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

NOTE:

The listed performances can vary depending on material and/or size of the cookware.

Control panel

Scope of delivery

4 x mounting clips 4 x cross-head screws

Description of the functions

Functional principle

When cooking with induction, the heat will only be created with magnetic force when cookware with a magnetizable bottom is placed onto a cooking

zone which is turned on. Only the bottom of the cookware is thereby heated, but not the cooking zone itself.

Benefits:

- time savings

- easy cleaning

Pot detection

The heating function is interrupted, if:

• cookware of unsuitable size,

• of non-magnetic material (e.g. aluminum),

• or a small object (e.g. knife, fork, and bowl) is placed onto the cooling area or

• the cookware was removed.

The notification " " will flash on the display of the respective cooking zone. If suitable cookware is not placed onto the respective zone within a minute,

the appliance will switch to standby mode. After around another minute, the appliance will switch off automatically.

Overheating protection

A temperature sensor monitors the inside of the appliance. If the maximum temperature is exceeded, the appliance is automatically shut off to prevent

damage.

Residual heat display

After shutting off the appliance, the display of the respective cooking zones shows the symbol "H" (Residual heat). This gives a warning not to touch

the zone.

WARNING: Risk of burning!

Do not touch the cooking zones as long as the residual heat indicator is on.