Consumption Values; Hints For Test Institutes - ZANKER ZKVS1530 Benutzerinformation

Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Capacity

Consumption values

The consumption values are intended as a
guide and depends on the pressure and the
temperature of the water and also by the var-
Programme
Intensive 70°
Normal 65°
65° A 30'
1)
BIO 50°
Rinse and Hold
1) Test programme for Test Institutes

Hints for test institutes

Testing in accordance with EN 60704 must be
carried out with appliance fully loaded and us-
ing the test programme (see "Consumption val-
ues").
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
Amount of detergent required
Rinse aid setting
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher's door.
Minimum - Maximum
(MPa)
place settings
Consumption values
Programme duration (in
minutes)
65 - 75
100 - 110
30
120 - 130
11
Full load: 9 standard place settings
0,05 - 0,8
9
iations of the power supply and the amount of
dishes.
Energy consumption (in
kWh)
1,5 - 1,7
1,4 - 1,5
0,8
0,8 - 0,9
0,1
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (see "Consumption values").
5 g + 20 g (Type B)
position 4 (Type III)
Water (litres)
18 - 20
18 - 20
8
12 - 13
5
93