What To Do In Case Of An Abnormal/Emergency Situation - EINHELL TC-AC 180/8 OF Originalbetriebsanleitung

6.3 Compressed air hose with quick-lock
coupling (3)
Connecting:
Insert the nipple of the air tool into the quick-lock
coupling, the sleeve will spring forward automa-
tically.
Disconnecting:
Pull back the sleeve and remove the tool. Cauti-
on! When releasing the quick-lock coupling, be
sure to hold the coupling piece to protect yourself
against injury from the rebounding hose.
6.4 Tire pressure gauge with adapters (Fig. 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to infl ate tires
easily and exactly. Use the pressure gauge to
check the tire pressure. If the tire pressure is too
high, you can reduce the pressure with the integ-
rated relief valve (e).
After fi lling with air, please check the set tire
pressure with a calibrated gauge, for example at a
petrol station.
The tire pressure gauge comes with a valve adap-
ter for car tire valves.
Other valve types can be fi lled using the supplied
adapters.
Using the equipment as a blow-out pistol (Fig. 3)
To use the tire pressure gauge as a blow-out
pistol you must fi rst unscrew and remove the
hose with the valve adapter for care tires. Now the
blow-out adapter (7) can be screwed to the tire
pressure gauge.
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning soiled
equipment. The infi nitely variable trigger lever al-
lows an exact dosing of compressed air.
Do not exceed the maximum permissible opera-
ting pressure of 8 bar (also shown on the back of
the tire pressure gauge).
Anl_TC_AC_180_8_OF_SPK9.indb 23 Anl_TC_AC_180_8_OF_SPK9.indb 23
GB
6.5 Instructions for the adapter set
For information on the correct use of the adapters
for the various valves, please refer to the following
overview (see Fig. 11 which shows how to con-
nect the adapter to the compressor).
•
Ball needle (Figure 4)
Range of applications: For infl ating balls. The
ball needle can be used to infl ate a variety of
diff erent balls.
TIP: To avoid damaging the valve, moisten
the needle slightly before inserting it.
•
Valve adapter (Figure 5)
Range of applications: For Dunlop cycle tire
valves.
This Dunlop valve adapter is designed for
infl ating cycle tires.
•
Adapter I (Fig. 6/Item I)
Range of applications: For all valves with an
internal diameter of 8 mm or more.
You can use this adapter to infl ate airbeds,
pools or boats.
TIP: Insert the adapter I into the valve as
shown in Figure 6, drawing d.
Important! The valve cap must be opened a
little by being pressed together slightly.
•
Adapter II (Fig. 7/Item II)
Range of applications: For screw valves.
This adapter can be used for all conventional
boats, kayaks and other large items such as
pools, which are fi tted with a screw valve.
•
Vent adapter (Fig. 8/Item III)
Range of applications: For defl ation valves
You can fi nd a defl ation valve combined with
other valves (standard valve, screw valve,
etc.) on many large articles such as an infl a-
table mattress.
•
Conical universal adapter (Fig. 9-10)
Range of applications: The universal adapter
can be used for infl ating airbeds and other
similar items.
Danger! Never direct the jet of compressed air at
yourself or at any other persons or animals.
Caution! Infl ating objects to above the recom-
mended pressure level may cause damage to the
objects or harm to bystanders!
6.6 What to do in case of an abnormal/emer-
gency situation
1. Stop the operation
2. Switch off the equipment.
3. Pull the power plug
- 23 -
21.01.2019 08:35:01 21.01.2019 08:35:01