Installation; Preparations - Sony DSBK-120 Bedienungsanleitung

Installation

Preparations

Before beginning the installation procedure, connect
the respective cables to the SDI-27 and SDI-28 boards.
SDI-27 board
• Connect the cable with the green connectors to the
connector labeled "GREEN" on the board.
• Connect the cable with the blue connectors to the
connector labeled "BLUE" on the board.
Green connector a)
Connector labeled "GREEN"
a) Use the connector at the farther end of the cable with
respect to the noise filter (see the illustration on the
previous page).
Cables
Blue connector a)
Connector labeled "BLUE"
SDI-27 board
SDI-28 board
• Connect the cable with the black connectors to the
connector labeled "BLACK" on the board.
• Connect the cable with the red connectors to the
connector labeled "RED" on the board.
Black connector a)
Connector labeled "BLACK"
a) Use the connector at the farther end of the cable with
respect to the noise filter (see the illustration on the
previous page).
Cables
Red connector a)
Connector labeled "RED"
SDI-28 board
15