Technical Specification - Techne IFB-51 Bedienungsanleitung

Temperature range
Temperature control stability at 450°C
Temperature uniformity at 450°C
Internal dimensions
Loading capacity
Typical heat-up time 20°C to 450°C
Compressed air supply pressure
Air consumption
Nominal Heater Power
Heater type
Control system
Electrical safety protection
Fluidised medium
External dimensions
Nett weight (less fluidised medium)
Gross weight (with fluidised medium)
Electrical supply
Display accuracy
Exhaust fan requirements

teChnICal SpeCIFICatIOn

diameter
depth
working depth
working diameter
1/3 of vol.
20°C to 600°C
at 450°C
at ambient
height
width
depth
50°C to 600°C (122°F to 1112°F)
+1.0°C (8"/ 20cm immersion depth with lid
after 2 hours at setpoint)
10°C
255mm (10.1")
405mm (16")
305mm (12") when using sample basket
213mm (8.4") when using sample basket
5L
105 minutes
150 minutes
204-1030kPa (30-150psi) clean, dry and oil free
48 l/min
115 l/min
4kW
Ceramic knuckle heating element
3 term PID temperature controller + thermocouple sensor
Solid state control
Control circuit fuse. Power fuse
40kg (85lbs) Aluminium Oxide, provided, 120 mesh
part No F0885
675mm (26.6")
518mm (20.4")
518mm (20.4")
60kg
100kg
230V, 1phase, 50/60Hz
±10.0º C (20cm, 8" immersion depth, with lid
after 2 hours at setpoint)
7125 l/min. (250 ft 3 /min.) at 5 in W.G.
20