Full-Screen Mode - Belkin OmniView SMB Benutzerhandbuch

Using the Remote IP Device

Full-Screen Mode

You can work on the target server in full-screen mode, just as if you were
connected to the server locally.
To work in full-screen mode:
1.
Ensure that the client computer has the same screen resolution as the
target server.
2.
Press "F11". The Internet Explorer window will disappear, leaving the
Internet Explorer menu bar at the top.
3.
Right-click the Internet Explorer menu bar and check "Auto-Hide".
The Internet Explorer menu bar will disappear and you will be in
full-screen mode (see Fig. 11).
4.
To exit full-screen mode, press "F11", or move your cursor to the
top of the window to display the Internet Explorer toolbar and click the
"Restore" button.
UK-31
Fig. 11 Example of Full-Screen Mode