Switch Configuration - Belkin OmniView SMB Benutzerhandbuch

Remote Installation
Step 5 Switch Configuration
When a KVM switch is connected to the IP Device, you must specify the
manufacturer and model of the switch in the "Switch Configuration" section.
The Switch-Configuration page allows you to specify the KVM Switches
attached to the IP Device. To open the page, click "Switch Configuration" under
"Administration" in the far-left column (see Fig. 4).
Fig. 4 Switch-Configuration Page
Note: By default, the Switch-Configuration page assumes that the IP Device is
connected to a single server. The page displays a single server-name field.
UK-23