Using The Snooze Button; Displaying Temperature - OWIM 307350 Bedienungs- Und Sicherheitshinweise

Using the snooze button

Press the Z
sounding to activate the snooze function.
The alarm signal is silenced and the
flash with the Z
16
The alarm signal sounds again after approx. 5 minutes.
Press the SELECT button

Displaying temperature

The LC display shows the indoor temperature
temperature
9
Press and hold down the SELECT button
onds. The °C display flashes.
Press the SET / RESET button
(Celsius) and °F (Fahrenheit) temperature scales.
Press the SELECT button to confirm your settings.
26 GB/IE/NI
Z
/ REGISTER button
Z
snooze function symbol
23
.
while the alarm signal is
21
/
to deactivate the snooze function.
13
23
to switch between the °C
24
Alarm 1 / 2 symbol
.
3
and the outdoor
for approx. 3 sec-