Control Panel - Dantherm HCP 10 Installations- Und Benutzerhandbuch

Remote Control HCP 10/ 11 – Installation and User Manual,
Parts This shows the parts that are included with the HCP 10/11 (wallbox is not included):
Procedure Follow these steps to mount the Remote Control:
Step
1 Mount the wallbox in the wall, if not already done.
The HCP 10/11 fits to a GIRA EAN 4010337061038 or single LK Fuga EAN
5703302105002 (green) wallbox/Unterputzdose.
2 Mount the metal frame on the wallbox using the 2 screws.
3 Put the cable from the wall through the plastic frame and click it into the
socket on the Control panel.
4 Switch the power on and check if the display on the HCP 10/11 lights up, and
Click the Control panel on the metal frame.
RJ cable
Plastic frame

Control panel

Action
continued
Wall box
Metal frame
2