Description Of The Device; Features - Futurelight DJ-HEAD 575 WASH Bedienungsanleitung

- - -m
The symbol determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than this value.
The device must only be installed on a non-flammable surface. In order to safeguard sufficient ventilation,
leave 50 cm of free space around the device. Please note that heat-sensitive objects may be deformed or
damaged by the emitted heat.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

DJ Multi-function Washlight
• CMY colour mixture
• Motorised colour-wheel with additional 4 discrete dichroic filters plus white and additionally with correction-
filters 3,200 K and 6,000 K and UV-filter
• Rainbow-effect in both directions
• Macro-function for combinations between CMY-colour mixture and colour-wheel
• Frost-filter for softer beam
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
• Combined shutter/dimmer unit allowing very smooth dimming and a strobe-effect of 1-10 flash per sec.
• Silent fans cooling; remotely controllable fan-speed
• Addressing via control panel with 4-digit LED display
• Remotely switching of the lamp
• Preprogrammed variable/random strobe and dimmer pulse effects
• Remotely controllable speed of PAN /TILT movement for easy programming
• Remote reset function
• 16 DMX-channels - 16 bit Pan/Tilt movement resolution
• 14 DMX-channels - 8 bit Pan/Tilt movement resolution
• Pan movement range 530°
• Tilt movement range 280°
• Automatic Pan/Tilt position correction
• High luminous-efficiency parabolic reflector
• Light-output via Fresnel lens with a diameter of 200 mm
• Radiation-angle of Fresnel lens motorized and adjustable between 12° and 34°
• 13 high-quality stepper-motors for smooth movements
• For MSR 575/2 or MSR 575 lamp
• DMX-control via every standard DMX-controller
30/92 00025955.DOC, Version 1.2