Mitsubishi Electric VL-50S2-E Betriebsanleitungen Seite 2

- Do not use the unit in excessively
hot areas (40°C or more), near
open flames, areas prone to oily
smoke, or where it could come in
contact with organic solvents.
- Fire could result.
- Do not disassemble the unit
in ways that require physical
Do NOT
alteration or tools.
disassemble
- Fire, electric shock or injury could
result.
- Do not let the unit get wet.
- Fire or electric shock could result.
Do not expose
to water
- Do not insert or remove the power
plug with wet hands.
*1
No wet hands
- Electric shock could result.
- Use at the rated voltage.
- Fire or electric shock could result.
You must
follow the
- Check that there is no dust on the
instructions
power plug
given.
- A dusty plug could cause fire from a
short circuit.
- Insert the plug
the socket, making sure it is not
loose.
- A loose fit could result in electric
shock or fire.
- Make sure that the outside air
intake opening is positioned so
that it will not take in combustion
gases or other exhaust.
- If intake air is not fresh, oxygen
could become depleted in the room.
- Always shut off circuit breakers or
remove the power plug
wall outlet during long periods of
disuse.
- Failure to do so could result in
electric shock from deteriorated
insulation, or fire from a short circuit.
- Install the outdoor weather covers
packaged with the unit.
- Rainwater entering the unit could
result in electric shock, fire or indoor
items getting wet.
- Immediately halt use in the event
of malfunction or breakdown.
- Continued use of the Lossnay could
result in smoke, fire, electric shock
or injury.
* Promptly shut off the circuit breaker
or remove the power plug*
wall outlet. Then contact the store of
.
*1
completely into
*1
from the
*1
from the
1
purchase for inspection and repair.
<Examples of malfunction and
breakdown>
- Blades do not turn when power is
turned on.
- The unit makes strange noises or
vibrates while running.
- Blade rotation is slow or
irregular. (Motors require periodic
maintenance.)
- You smell burning.
- The unit mount is corroded or
damaged.
- Always shut off circuit breakers
or remove the power plug
the wall outlet before performing
maintenance work.
- Electric shock and burns could
result if power is flowing.
Caution
- Do not place combustion
equipment in the direct path of the
Prohibited
air from the unit.
- Incomplete combustion could result
in accidents.
- If using a step-ladder for
maintenance, be sure to place it
on level ground where there is
nothing underfoot.
- Injury could result from falling over.
- Never attach the unit to the ceiling.
- Injury could result if the unit falls.
- Because this product is designed
to be installed at a higher location,
install the product at least 1.8 m
above the floor.
- Failure to heed this warning may
result in injury.
- A fan rotates inside the unit during
operation. Never stick anything
Do NOT touch
inside the unit during operation.
- Injury could result.
- Do not use the unit in a bathroom
or other highly humid location.
You must
- Electric shock or breakdown could
follow the
instructions
result.
given.
- Wear gloves when maintaining the
unit.
- Failure to wear gloves could result in
injury.
- After maintenance, reattach parts
securely.
- Injury could result if the unit falls.
Eng-2
from
*1