Setup Wizard; Language Select; Speaker Connection; Source Setup - Marantz NR1402 Erste Schritte

ENGliSh DEutSch

Setup Wizard

When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
1

Language Select

Set the language for the instructions on
the television screen.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 61 "Language").
2

Speaker Connection

Connect the speakers for surround sound.
NOTE
Connections for speakers other than 5.1 channel
speakers cannot be set using the Setup Wizard.
Select "Others", and then select "Skip" in "2. Speaker Connection" to proceed to "3. Speaker
Calibration". (For details on the setting method, see m page 29 "Speaker installation/connection
(Advanced)".)
4
FRANçAiS itAliANo ESpAñol
Language Select
Please select the English
language for the on Deutsch
Français
screen menu.
Speaker Connection
Please select the
speaker configuration
to be used.
5.1ch
Others
5.1ch is the most
popular surround
system.
NEDERlANDS SVENSKA
3
Speaker Calibration
Configure the settings for your speakers,
and for the optimum surround sound for
your room.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 11 "Set up speakers (Audyssey ® Auto Setup)").
4

Source Setup

Set the connecting terminals for each
device to be set, and connect to the
terminals.
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 64 "Input Assign").
This completes the Setup Wizard.
Speaker Calibration MultEQ
Detect & Measure (Main)
Please connect
microphone.
Measure
Source Setup
Please select device. [1/2]
BD
DVD
SAT
GAME
AUX
TV