Zipper Mowers ZI-GPS70G Betriebsanleitung Seite 41

• Access while it is working in the cutting tools.
• Make sure that they do not come under the cutting tool! Always use the correct
cutting tool for the work to be done.
• Do not wear loose clothing that may get caught in moving parts.
• Turn off the cutter when the machine for transport across another surface must
be tilted than grass and when transporting the machine to and from a machined
surface.
• Disengage the cutter before the start
• Start or press the starter with caution according to the instructions and pay
attention to allow sufficient distance between the feet to the cutting elements
• If the machine has to be tilted at the start, lift only the side facing away from the
operator side high
• Do not use the twig saw in the vicinity of cables, power or telephone lines.
• Hold when working with the branch saw a safety distance of 10m to aboveground
live lines.
The running machine should never be left unattended !
Stop the motor upon completion of working, as well as any break.
Never lift or carry the machine with the engine running
When the engine is running or hot , never let the fuel cap be removed
Switch off the machine , disconnect the spark plug on machines with battery and
start the ignition key and allow the unit to cool down and come to a standstill :
Before you check the machine clean , store or carry out work on him
Before you resolve blockages
If a foreign object , inspect the machine for damage and perform the necessary
repairs before you restart the machine and work with it
If the machine begins to vibrate abnormally or the operation noise amplified ,
investigate immediately and check for loose parts and tighten any loose parts.
Before restarting the work first and make necessary repairs
Before you set the working position of the cutter
Before you refuel
However, if you leave the machine
HEDGE TRIMMER:
• Not to pick up objects using
• cutter running after the release of the throttle control (free-wheeling).
• Cutting always start with running cutter
Z.I.P.P.E.R MASCHINEN GmbH
Gartenpflegeset / Garden maintenance set ZI-GPS70G / ZI-GPS182G
• Within a radius of 15m, no other people and animals may
be!
• This distance also adhere to things!
• Risk of material damage!
www.Zipper-maschinen.at
SAFETY
Seite 41