Battery Level; Led Status Indicator - Promate AuraWatch Handbuch

Operation Instructions:
Checking the remaining power left in AuraWatch back-up battery
1. To view the remaining power left, press the power button once and view the LED Battery
Level Display

Battery Level

0%∼25%
25%∼50%
50%∼75%
75%∼100%
Charging AuraWatch back-up battery
• Connect one end of the Micro-USB Cable to AuraWatch and the other end to a desktop/laptop
or a USB Power Adapter. The Battery Level LED display will will start ashing to indicate that
the back-up battery is charging normally.
Charging USB chargeable devices using the USB Port
• Plug the USB cable into the USB output port on AuraWatch back-up battery and the other
end into the device.
• Press and hold the power button for 3 seconds to begin charging

LED Status Indicator

Red LED
Yellow LED
Blue LED
Green LED
4