Uv Index; Barometer - Oregon Scientific WMR100TH Bedienungsanleitung

• For barometer: Millimeters of mercury (mmHg),
inches of mercury (inHg), millibars per hectopascal
(mb / hpa).
• For rainfall: Millimeters (mm), inches (in), inches per
hour (in / hr) or millimeters per hour (mm / hr).

UV INDEX

The UV index levels are as follows:
UV INDEX DANGER
LEVEL
0-2 Low
3-5 Moderate
6-7 High
8-10 Very high
11 and above Extremely high
To change the high UV alarm:
1. In the UV / Barometer / Rainfall Area and UVI
reading display. Press and hold ALARM to enter the
high UV alarm setting.
2. Rotate the dial left or right to set the desired values.
3. Press ALARM to confirm the settings.
To activate / deactivate the high UV alarm:
1. In the UV / Barometer / Rainfall Area and UVI
2. Press MEMORY /

BAROMETER

To change the barometer alarm:
1. In the UV / Barometer / Rainfall Area and Barometer
ICON
2. Rotate the dial left or right to set the desired values.
3. Press ALARM to confirm the settings.
To activate / deactivate the barometer alarm:
1. In the UV / Barometer / Rainfall Area and Barometer
2. Press MEMORY /
To set the altitude level compensation for the
Barometer readings:
1. In the UV / Barometer / Rainfall Area and Barometer
2. Rotate the dial left or right to set the desired values.
3. Press MODE to confirm the setting.
18
reading display, press ALARM repeatedly to select
the desired alarm.
deactivate the alarm.
reading display. press and hold ALARM to enter the
Barometer alarm setting.
reading display, press ALARM repeatedly to select
the desired alarm.
deactivate the alarm.
reading display. Press and hold MODE to enter the
altitude setting.
ON/OFF to activate or
ON/OFF to activate or