Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TEMPERATURE AND HUMIDITY
ons will
You can view the current indoor/outdoor temperature/heat index, humidity, dew-point
and the max/min memories on the base station.
Select the temperature unit on App:
To view current temperature, heat index and TODAY MAX/MIN readings on the
device:
1. Press SELECT repeatedly to navigate
2. Press MODE repeatedly to toggle between the temperature/heat index displays.
sensor.
3. Press MAX / MIN to toggle among current / MAX /MIN readings.
4. Press
or
contents
ensor.
To view humidity, TODAY MAX/MIN and dew-point readings on the device:
or "- -"
1. Press SELECT repeatedly to navigate
ain.
2. Press MODE repeatedly to toggle between the humidity/dew-point displays.
3. Press MAX / MIN to toggle among current/MAX/MIN readings.
The heat index provides an indication on how hot it feels based on air
NOTE
temperature and relative humidity.
NOTE
The dew point advises at what temperature condensation will form.
elect the
rly from
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and humidity readings. The trend
is shown as follows:
the App
p Store
RISING
ected.
og in.
WIND CHILL / DIRECTION / SPEED
joining",
You can view and set the numeric wind speed with maximum memory display on our
ork.
dedicated App.
ea, then
Select the wind units on the App.
•
Kilometers per hour (kph)
•
Miles per hour (mph)
d".
•
Meters per second (m/s)
•
Knots (knots)
r station.
View on the device:
a to the
The base station provides wind speed and wind direction information.
To read the wind direction, find the compass point
with our
me zone
To select wind display mode:
Press MODE on wind area to toggle between:
•
GUST (Gust)
•
AVG (Average)
The wind level is shown by a series of text icon:
LIGHT
2 -8 mph
(3-13 km/h)
To read the wind direction:
isphere.
Status
GUST
31 mile)
AVG
AVG
To view today maximum wind speed and minimum wind chill readings:
1. Press SELECT repeatedly to navigate
wind chill area.
2. Press MAX / MIN to toggle between current/MAX wind speed and current/MIN
wind chill readings.
NOTE
The wind chill factor is based on the combined effects of temperature and
wind speed.
P/N: 300103876-00001-10 Rev1.0
6／70
WMR500_EN R25.indd 5
C (for EU)/
F(for US).
o
o
icon to the temperature/heat index area.
to change channel (outdoor temperature only).
icon to the humidity/dew-point area.
STEADY
is pointing to.
MODERATE
STRONG
9-25 mph
26-54 mph
(14-41 km/h)
(42-87 km/h)
Wind Direction Indicator
Meaning
Real-time wind direction
Real-time average wind direction
Wind direction of last hour
(Max 6 sets)
icon to the wind speed/wind direction/
UV/RAINFALL/ BAROMETRIC PRESSURE/PM
The station is capable of displaying the UV index, the current or past 24 hours of
rainfall, max rain rate, barometric pressure and air quality readings.
RAINFALL
To view the recorded rainfall/rain rate of the current hour or past 24 hours:
1. Press SELECT repeatedly to navigate
2. Press MODE repeatedly to select
3. Press MAX / MIN repeatedly to toggle among current / today max rain rate, past
24 hours, or today accumulated rainfall readings.
Select the measurement unit for the rainfall/rain rate on the App:
•
mm (millimeter); in (inch)
•
mm/hr (millimeter per hour); In/hr (inch per hour)
UV INDEX (OPTIONAL)
To view the UV reading:
1. Press SELECT repeatedly to navigate
2. Press MODE repeatedly to select
3. Press MAX / MIN to toggle between current/MAX UV index display.
BAROMETRIC PRESSURE
To view the barometric pressure reading:
FALLING
1. Press SELECT repeatedly to navigate
2. Press MODE repeatedly to select
To view pressure trend:
The barometric pressure trend icons are based on recent sensor readings.
The trend lines are shown next to the pressure readings. The trend is shown as
follows:
RISING
Select the measurement unit for the barometer on the App:
Barometric pressure: mmHg (Millimeters of mercury)
•
•
inHg (inches of mercury), mbar (millibars)
•
hPa (hectopascal).
Set the altitude level compensation:
The altitude reflects the distance from sea level at your position. You can set the
altitude level compensation for the barometric pressure readings on the App.
NOTE When altitude is set to 0 meter, the pressure reading is the local pressure.
If the altitude is set to the current location, the new pressure reading is an offset
pressure to the sea level.
PM (OPTIONAL)
To view the PM reading:
1. Press SELECT repeatedly to navigate
area.
2. Press MODE repeatedly to select PM 2.5, PM10, AQI.
Select the measurement unit ppm or ug/m
STORM
BACKLIGHT
>55 mph
Press any button on the base station to activate the backlight.
(>88 km/h)
RESET
Press and hold
settings.
MAINTAINANCE
Maintain the Rain Gauge
Clean the hole of the rain collector and the debris collector for maintaining accuracy is
very important. Unscrew the debris collector and clean the dirt by water periodically.
Maintain the Wind Sensor
If the wind cup doesn't spin in the wind or does not spin as fast as they should.
Remove the wind cup and clear out all bugs, spider webs or debris.
NOTE Do not apply any fluid lubricant on the shaft and bearing. It probably breaks
the inner electronic components.
5
icon to the UV/Rainfall area.
.
icon to the UV/rainfall area.
.
icon to the barometric pressure/PM area.
.
STEADY
icon to the
Barometric pressure/PM
3
for the PM on the App.
and
together for 5 seconds to return the device to default
FALLING
2017/3/14 下午2:50
Werbung
Kapitel
Inhaltsverzeichnis
