Temperature And Humidity Trend; Comfort Level - Oregon Scientific WMR100TH Bedienungsanleitung

To change the high / low temperature, heat index,
wind chill, humidity and dew point alarms:
1. In the Temperature or Humidity Area, press ALARM
repeatedly to toggle between high / low alarms for
temperature, heat index, wind chill, humidity and
dew point readings.
2. Press and hold ALARM to enter the alarm setting.
3. Rotate the dial left or right to set the desired values.
4. Press ALARM to confirm the setting.
To activate / deactivate the high / low temperature,
heat index, wind chill, humidity and dew point
alarms:
1. In the Temperature or Humidity Area, press ALARM
repeatedly to select the desired alarm.
2. Press MEMORY /
deactivate the alarm.
NOTE The dew point advises at what temperature
condensation will form. The wind chill factor is based on
the combined effects of temperature and wind speed.
ON/OFF to activate or

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
TREND ICON

COMFORT LEVEL

The Comfort Zone icon indicates how comfortable the
climate is based on current temperature and humidity
measurements:
ICON DESCRIPTION
Comfortable
Neutral
Uncomfortable
15
DESCRIPTION
Rising
Steady
Falling