Braun TributeCollection SJ 3000 Gebrauchsanweisung Seite 7

Preparing fruit or vegetables
Important: Use only well ripened fruits, otherwise
6
the filter may be clogged up which would result in
repeated cleaning of the filter. Wash or peel the fruit
or vegetables you want to process. Fruit with large
pips or stones should always have these removed
first. Process seed fruit (such as apples, pears) with
peels and cores. Fruit and vegetables with thick
peels (e. g. citrus fruits, melons, kiwis, beets) must
be peeled first. For grapes, cut off the main stem.
For leaf vegetables (e. g. cabbage and spinach)
and herbs, roll up leaves together tightly. Cut fruit
and vegetables into pieces large enough to fit into
the filling shaft.
Currants and rhubarb are not suitable for making
juice in the Braun spin juicer SJ 3000.
Extracting juice
• Put fruit or vegetables into the filling shaft
2
Turn the switch on = «I» and press lightly with
0
the pusher (A). Add further fruits or vegetables
while the motor is running.
• The amount of juice you extract depends on the
nature of the fruits and vegetables. When pro-
cessing berries the quantity of juice will be
smaller, because of their high amount of pectin
(pectin is a natural gelatine).
(Special berry presses or steam presses are
better suited to that type of fruit.)
• Fruit and vegetable juices contain valuable
vitamins and minerals, which quickly deteriorate
when they come into contact with oxygen or light.
Drink juice fresh – right after it has been extracted.
Emptying the pulp container
You can extract juice continuously until the pulp
container is full:
• When processing produce with high liquid content
(e. g. tomatoes, grapes, melons):
Do not process more than 3 kg of fruit or vege-
tables before emptying the pulp container.
• When processing drier produce (e. g. carrots,
pears, apples):
Empty the pulp container as soon as it looks full.
If the juice suddenly becomes much thicker or if you
can hear the motor speed slow down, the filter must
be emptied (see «Disassembling»).
Empty the pulp and put the appliance together again.
Disassembling
2
1. Turn the switch
2. Remove the pusher
Swing open the pulp container
pull off downward diagonally (B). (When replacing
the pulp container, insert the top first.)
3. Press the unlocking buttons
the juicer (C), to unlock the cover
cover.
4
and filter
off = «0».
0
. Remove the filling tray
4
, push it up and
3
on both sides of
7
. Remove the
4. Remove the juice ring
6
. Take the filter out of the juice ring.
Cleaning
• Always remove the plug from the socket first!
• Clean the motor part
– never immerse it in water.
All other plastic parts can be washed in a
dishwasher or using warm water and normal
dishwashing liquids. The plastic parts may
discolour when processing food with a high
pigment content (e. g. carrots):
Use vegetable oil to clean before using the
dishwasher.
Important: The filter ist not dishwasherproof, but
can easily be cleaned with a small brush. Do not
use a damaged filter. We recommend to replace
the filter after 5 years (available at Braun Service
Centres).
8
.
For space-saving storage, place the filling tray
upside down on top of the juicer.
Subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at Braun Service
Centre or at appropriate collection points
provided in your country.
6
9
.
5
together with the filter
1
with a damp cloth only
9
7