Panasonic JS-960WP Serie Bedienungsanleitung Seite 37

(10) Attach the top case, and secure it using the screws (2 locations).
p Make sure that the tabs of the top case are on the inside. If they are on the outside,
they may be damaged.
(11) Connect the cable to the display unit and arrange the cable properly.
p Arrange the cable inside the display unit cable guide.
p Connect the cable for the MSR unit and cable for the fingerprint unit to their
respective designated positions.
(12) Follow steps (5) and (8) of "MSR Unit (Short Type) Installation" to reattach the MSR
unit.
(10)-1
(10)-4
NG
(10)-2
Screws
(10)-5
(10)-3
OK
(11)
For
Fingerprint
For MSR
unit
unit
37