Panasonic JS-960WP Serie Bedienungsanleitung Seite 25

(5) Hold the new display unit with both hands and insert the connector section of the
display unit into the connector inlet guide of the main unit slowly to connect the
connector.
p When the connector section is connected, do not press the LCD surface of the
display unit.
(Failure to observe this may result in damage to functions of the LCD or touch
panel.)
(6) Tighten the 2 thumbscrews of the main unit by hand to secure the display unit.
p Be sure to use hand when tightening the thumbscrews.
p Make sure that no looseness is detected when trying to move the display unit.
(7) Close the thumbscrew covers of the main unit, and close the cable cover.
(5) (6) (7)
25