Fingerprint Sensor Kit Installation - Panasonic JS-960WP Serie Bedienungsanleitung

Fingerprint Sensor Kit Installation

Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
*Make sure to ground the unit before starting this work.
Fingerprint Sensor Kit (JS-960FPK010) contents
Fingerprint unit x 1
(1) Follow the steps for "MSR Unit (Short Type) Installation" in reverse, and remove the
MSR unit from the display unit.
(2) Remove the screws (2 locations).
(1)
34
Bottom case x 1
(2)
Screws
Cable x 1