Setup Wizard; Viewing System Info; Setting Backlight - Scansonic IN210 Bedienungsanleitung

1. Press MENU button > Main menu > System settings > Software update, press
SELECT/SNOOZE knob to confirm.
2. Turn SELECT/SNOOZE knob to select 'Auto-check setting', your radio will check periodically
for new version software.
3. Turn SELECT/SNOOZE knob to select 'Check now', your radio will check now if any new
version software available for upgrade.

Setup Wizard

When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
1. Press MENU button > Main menu > System settings > Setup wizard, press
SELECT/SNOOZE knob to confirm.
Turn SELECT/SNOOZE knob to select 'YES', and then press SELECT/SNOOZE knob to
2.
confirm.

Viewing System Info

This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press SELECT/SNOOZE knob
to confirm.
2. Turn SELECT/SNOOZE knob to view 'SW version', 'Spotify version', 'Radio ID' and
'Friendly Name'.

Setting Backlight

Press MENU button > Main menu > System settings > Backlight, press SELECT/SNOOZE
1.
knob to confirm.
2. Turn SELECT/SNOOZE knob to select 'Power-on Level' or 'Standby Level', then press
SELECT/SNOOZE knob to confirm.
3. Turn SELECT/SNOOZE knob to select backlight level, and then press SELECT/SNOOZE
knob to confirm the setting.
Power-on Level
Standby Level
26
•
High
•
Low
•
High
•
Low
•
Off