Equaliser; Network Setup - Scansonic IN210 Bedienungsanleitung

Equaliser

This feature enables you to choose a sound equalization profile. Each of the equalization setting
will change the tone of the sound from your radio when selected.
1. Press MENU button > Main menu > System settings > Equaliser, and then press
SELECT/SNOOZE knob to confirm.
Turn SELECT/SNOOZE knob and then press it to select Normal, Flat, Jazz, Rock, Movie,
2.
Classic, Pop, News, My EQ or My EQ profile setup.
3. To set up My EQ, select 'My EQ profile setup', and then press SELECT/SNOOZE knob to
confirm. Turn SELECT/SNOOZE knob to select Bass or Treble, and then press
SELECT/SNOOZE knob to confirm. Turn SELECT/SNOOZE knob to change the value of
Bass or Treble, and then press SELECT/SNOOZE knob to confirm. Press BACK button,
display will show 'Save changes'. Turn and press SELECT/SNOOZE knob to select 'YES' to
save changes.

Network Setup

Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
Press MENU button > Main menu > System settings > Network, press SELECT/SNOOZE
1.
knob to confirm.
2. Turn SELECT/SNOOZE knob to select your preferred network setting option:
Network wizard:
PBC Wlan Setup:
View settings:
Manual settings:
NetRemote PIN Setup:
Network profile:
Keep network connected:
3. Press SELECT/SNOOZE knob to confirm your setting.
24
Scan for available networks
Set up a WPS encrypted network (only supporting the
router uses WPS 2.0)
View network settings such as MAC address, Wlan region,
IP address etc.
Set wireless connection
Set a Net Remote Pin code
List of registered networks or delete some of unwanted
networks
Keep network connected in FM, Aux in and standby modes