CAME MR8106 Handbuch Seite 6

1
OPENING THE SENSOR
Before fi xing
2
MOUNTING & WIRING
Do not touch electronical
parts.
Wall mounting above sliding or
revolving door
1
Apply the mounting template.
Drill 1 hole for the cable and
pull it through.
Drill 2 holes for the screws.
After fi xing
Avoid vibrations.
Mounting on door axis (swing doors)
2
Connect the wires accordingly:
1 - BROWN - POWER SUPPLY
2 - GREEN - POWER SUPPLY
3 - WHITE - COM
4 - YELLOW - NO
5 - YELLOW - NC
Do not cover the sensor.
Ceiling mounting in front of door
(sliding, revolving or swing doors)
3
or
Avoid proximity to neon
lamps or moving objects.
Position the
cable as indicated.
Fix the sensor fi rmly.