Attaching The Connector Caps - Sony DVCAM DSBK-170 Installationsanleitung

7
8

Attaching the Connector Caps

When the Y/R–Y/B–Y connectors are not being used, put the
supplied connector caps on the connectors.
Connect the other harness to the board (DDE-13) attached
to the bottom of the DSR-70/70P.
Replace the DSR-70/70P battery panel and bottom panel,
and secure them using the screws.
Note
Before replacing the battery panel, make sure again that
the harness is not over any board levers. Be sure to pass the
harness over the boards and push its slack into the space
between boards.
Connector
caps
21