Handling And Operation; Ionisation Function; Charging Function - ULTIMATE SPEED UKLL 5 A1 Bedienungsanleitung

Handling and operation

Ionisation function

♦ Connect the car charger to the on-board
power supply (cigarette lighter) in your
vehicle . The white LED in the housing
indicates that the device is ready for
operation . Depending on the vehicle
type, it is possible that the ignition has to
be switched on first .
♦ Press the On/Off switch
3
LED
ionise the air .
♦ Press the On/Off switch
switch off the car charger .

Charging function

CAUTION
► The maximum current output of each
USB socket
► The maximum current output of the car
charger when both USB sockets
are being used simultaneously is
4 .2 A . The current output is divided
according to the assignment of the
USB ports
♦ Connect the car charger to the on-board
power supply (cigarette lighter) in your
vehicle . The white LED in the housing
indicates that the device is ready for
operation .
■ 26 │
lights up and the device starts to
1
is 2 .1 A .
1 .
GB │ IE
4 . The red
4
again to
1
UKLL 5 A1