Parkside PEK 2.7 C2 Montage-, Bedienungs- Und Sicherheitshinweise Seite 12

m
ATTENTION! RISK OF PROPERTY DAMAGE
Check the product before every use! Discontinue use if any damage
to the product is detected!
The product shall never be subjected to extreme temperature
fluctuations as this could result in condensation and electrical
short circuits . If the product is subjected to extreme temperature
fluctuations, however, wait (approx . 2 hours) until the product has
reached ambient temperature before use .
Do not operate the product near heat sources, e .g . radiators or
other devices emitting heat!
The product shall not be subjected to excessive shocks and
vibrations .
Do not use the product in the immediate vicinity of magnetic fields
(such as speakers) .
Do not expose the product to strong artificial light .
Do not bend the gooseneck excessively – observe the minimum
bending radius of 45 mm .
Only the camera head and the gooseneck may be immersed in
liquids . Do not immerse these parts deeper than 100 cm . The fluid
must not conduct electricity . The parts may only be immersed in
neutral liquids . Use in acids, alkalis or solvents can destroy the
product .
Keep the main unit dry .
The OWIM GmbH & Co KG is not responsible for unauthorized
modifications of this product .
The user of the product is fully responsible for unauthorized
modifications of the product, as well as replacement of such
products .
It is necessary to repair the product if it has been damaged in any
way, for example, if the housing is damaged, if liquid or objects
have penetrated the product or if the product has been exposed to
rain or moisture .
10 GB