Kenwood AT641 Bedienungsanleitungen Seite 3

before using for the first time
1 Wash the parts: see 'Cleaning'.
key
a pusher
b feed tube
c lid
d filter basket
e bowl
f juice spout
g interlocking latches
h base unit
i juice jug holder
j release button for juice jug holder
k juice jug and lid
l pulp collector
to use your juice
extractor
preparing food
Remove stones (plums, peaches,
l
cherries etc).
Remove tough skins (melons,
l
pineapples, cucumbers, potatoes
etc).
Soft-skinned and other foods
l
just need washing (apples,
pears, carrots, radishes, lettuce,
cabbage, parsley, spinach, grapes,
strawberries, celery etc).
Citrus peel - Peel and remove
l
the white pith, otherwise the juice
may be bitter. For best results we
recommend using the citrus juice
attachment which is available
separately.
assembly and use
Remove high speed outlet cover
l
before assembling unit.
1 Place the bowl onto the base unit
so that the juice spout fits into the
groove of the base unit.
2 Fit the filter basket into the bowl,
ensuring the t arrows on the
underside of the filter basket line
up with the t arrows on the top of
the base unit.
3 Fit the lid, ensuring that the lid
extension fits over the bowl lip.
4 Lock into position by moving the
interlocking latches out from the
base, then lifting and clipping over
English
the mouldings on the top of the lid.
Push the latches in at the base to
secure into position.
5 Attach the juicer to the mixer,
turning until it locks into position
1.
6 Slide the pulp collector into the lid
2.
7 Push the juice jug holder into its
housing, it will automatically lock in
place.
8 Fit the lid to the juice jug, then fit
into its holder 3.
9 If necessary cut the food to fit the
feed tube.
10 Place the food in the feed tube.
For optimum performance use
speed 2 and never exceed
speed 2. Push the food down
evenly with the pusher ensuring
that the groove in the pusher aligns
with the tab on the rim of the feed
tube - never put your fingers
in the feed tube.
11 Switch off and unplug.
12 To dismantle the juicer reverse
the assembly procedure. The
juice jug holder may be removed
by pressing the release button if
required.
13 Refit the high speed outlet cover
after use.
important
If the juicer starts to vibrate, switch
l
off and empty the pulp from the
filter basket. (The juicer vibrates
if the pulp becomes unevenly
distributed).
Switch off and empty the pulp and
l
juice containers regularly during
use.
hints
Insert soft food slowly to get the
l
most juice.
Vitamins disappear - the sooner
l
you drink your juice, the more
vitamins you'll get.
If you need to store the juice for a
l
few hours put it in the fridge. It will
keep better if you add a few drops
of lemon juice.
3