Herunterladen Inhalt Inhalt Diese Seite drucken

Dmx Linking; Master/Slave Connection - Chauvet Professional OVATION F-415VW Kurzanleitung

Vorschau ausblenden Andere Handbücher für OVATION F-415VW:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 12 Ovation F-415VW products at 120 VAC, 21 products at 208 V, or 23 products at 230 VAC.
Never exceed this number. Power-linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Never connect this product to AC and DC power sources at the same time.
Replacing the Fuse
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
Power Diagram
100–240 VAC,
50/60 Hz
input only

DMX Linking

The Ovation F-415VW will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from www.chauvetprofessional.com.
DMX Connection
The Ovation F-415VW uses a 5-pin DMX data connection for its DMX personalities: 2Ch, 5Ch, 7Ch, 7Ch2, 10Ch, 14Ch,
17Ch, and 19Ch. See the User Manual for information about connecting and configuring the product for DMX operation.

Master/Slave Connection

The Ovation F-415VW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check with the manufacturer or the DMX controller's User Manual, as not all DMX controllers
have this capability. The Ovation F-415VW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Ovation F-415VW QRG Rev. 8
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Wire (Europe)
Brown
Blue
Green/Yellow
28 VDC input only
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis