Making Calls With Bteasycom; Led Indicator; Care And Maintenance - Cellular Line BTEASYCOM Bedienungsanleitungen

5. making calls with BteasYCom

If BTEASYCOM is connected to a Bluetooth® cell phone,
now you can make calls with BTEASYCOM . The specific
operations are as follows:
function Basic operation
Incoming ring Auto-ringing
Short press mfB
Redial last number button twice
quickly
Short press mfB
button when the
Cancel calling
call is not put
through
Short press mfB
Answer a call
button
Long press mfB
Reject a call button for 2 sec-
onds
Short press mfB
End a call
button
Short or long press
Volume up
vol+ button
Short or long press
Volume down
vol– button
notes:
- When the volume is adjusted to max . or min . you will
hear two "DU" tones .
- When two interphones are connected each other and
a Bluetooth® cell phone is also connected, you can
answer incoming calls with the interphone or dial a
number with the Bluetooth® cell phone during inter-
com and the intercom will be kept . After ending the
call, the interphone will recover to intercom status .
But you can't send out intercom during a phone call .

6. led indicator

a) When it is charging
led indicator
Red LED is on
Red LED is off
indication tone
Ringing
b) When it is not charging
led indicator
1 short tone
Red and blue LEDs flash
alternately
Blue LED flashes once every 3
1 short tone
seconds
Blue LED flashes twice quickly
every 4 seconds
1 short tone
Blue LED flashes twice quickly
every 4 seconds
1 short tone
Blue LED flashes slowly
Red LED flashes
1 short tone
None

- Care and maintenanCe

Read the following recommendations before using
None
BTEASYCOM . Following these you will be able to enjoy
our product for many years .
- Keep it dry and don't take it to damp places to avoid
the product's internal circuit being affected .
- Keep the product away from direct sunlight or hot
places . High temperatures will shorten the life of
electronic devices, destroy the battery or distort
certain plastic parts .
- Don't expose the product to cold areas . It may dam-
age the internal circuit board .
- Don't try to disassemble the product as it may get
damaged if you are not professional .
- Don't let it fall down onto the floor or other hard
surfaces . The internal circuit might get damaged .
BTEASYCOM
status of BteasYCom
Charging in progress
Charging finished
status of BteasYCom
Pairing mode
Standby mode (not
connected)
Standby mode
(connected)
Incoming call/calling
During a call
Low power
IT
EN
FR
ES
DE