Turning On/Off Bteasycom; Pairing Bteasycom With A Bluetooth® Device - Cellular Line BTEASYCOM Bedienungsanleitungen

2. turning on/off BteasYCom

function operation led indicator
Power on Press and Blue LED is on
hold mfB for 1 second
button for 3 and then flashes
seconds twice
Power off Press and Red LED is on
hold mfB
for 1 second
button for and then flashes
7-8 seconds twice
Entering Press and Red and blue
hold mfB
pairing mode LEDs flash
button for alternately
3-5 seconds
note: If you want BTEASYCOM to enter pairing mode,
you have to press and hold mfB button for 3-5 seconds
when the interphone is turned off or in standby mode .
3. Pairing BteasYCom with a Bluetooth® device
Pairing with a Bluetooth® cell phone
You have to pair BTEASYCOM Bluetooth® interphone
with a Bluetooth® cell phone before first use . Please
make sure your cell phone is Bluetooth®-enabled .
Specific pairing steps may vary with different models
of cell phones . Please refer to your cell phone's user's
manual for further information . The general pairing
steps are as follows:
1) Keep BTEASYCOM and Bluetooth® cell phone within 1
meter when pairing;
2) Ensure BTEASYCOM is turned off, otherwise turn off
BTEASYCOM first;
3) Press and hold mfB button for about 3-5 seconds, the
red and blue LEDs will flash alternately . BTEASYCOM
now entered pairing mode;
4) Turn on your cell phone's Bluetooth® function to
search for Bluetooth® devices . After the search is
completed, select "BTEASYCOM" from the Bluetooth®
device list;
indication
5) According to the indication, enter password or PIN
tone
No:"1234", and press "Yes" or "confirm";
1 long tone
6) After successful pairing, select "BTEASYCOM" from
the Bluetooth® device list, and press "connect" . The
indicator light of BTEASYCOM will flash twice every 4
1 long tone
seconds if connected successfully .
2 short tones
Pairing two interphones together
If you want to use the Bluetooth® intercom feature, you
have to pair two interphone together first . The general
pairing steps are as follows:
1) Keep two interphones within 1 meter when pairing;
2) Make one of interphones enter pairing mode;
3) Press and hold mfB button of another interphone
until blue LED is on;
4) The interphone whose blue LED is on will auto-
matically search and connect the interphone which
entered pairing mode . After successfully connecting,
the blue LEDs of both interphones will flash twice
every 4 seconds .
BTEASYCOM
IT
EN
FR
ES
DE