Herunterladen Inhalt Inhalt Diese Seite drucken

Switching On The Lights; Faqs; Troubleshooting; Cleaning - ULTIMATE SPEED UPBS 12000 A1 Originalbetriebsanleitung

Powerbank mit starthilfefunktion
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 65
Set up/ FAQs / Troubleshooting / Cleaning / Storage
Please note: You cannot use this option if
the power bank is being charged.
Caution Only use the 12V/8A cigarette
lighter adapter supplied. There is a risk of
short circuit if third-party adapters are used.

• Switching on the lights

When switching on the lights, hold down
the power button
Press the power button
on strobe mode.
Press the power button
on the SOS signal.
Press the power button
off the light.
CAUTION! Do not look directly at the
LED lights as this can damage your eyes.
Note: It is not possible to turn on the light
while the power pack is charging.

• FAQs

Q: How can I switch the device off?
A: The device automatically switches off after
20 seconds of non-use.
Q: How long does it take to fully
charge a mobile phone with the
device?
A: With a battery power of 2500mAh:
1A (2–3 hours) / 2A (1–2 hours)
Q: How often can a vehicle be star-
ted with a fully loaded device?
A: approx. 20 times (engine capacity ≤ 2.0 l)
Q: How long does the device's bat-
tery last?
A: 3–6 months. However, we recommend
charging the battery every 1–2 months.
12
GB/IE/NI
for 3 seconds.
4
again to switch
4
again to switch
4
again to switch
4

• Troubleshooting

= Problem
= Cause
= Solution
The jump start aid is not fully
charged, although all 4 indicator
lights
are permanently lit.
5
It is 60% charged after a long period out
of use or in storage.
Disconnect the power supply adaptor
or USB power cable
The correct number of LEDs are glowing.
There is no response to pressing
the power button
The jump start aid's low voltage protec-
tion is activated.
Connect the USB power cable
power supply adaptor (5V

• Cleaning

You must not splash the
device with water or place it in
water. There is a risk of injury due to
electric shock if moisture enters the
device.
Do not use cleaners or solvents. These
could damage the equipment beyond re-
pair.
Keep the casing of the device clean.
Use a damp cloth or brush to clean.

• Storage

Keep the device in a dry location and out
of the reach of children.
To keep the device and its accessories
safe, use the enclosed storage bag
12
and reconnect.
7
.
4
to the
7
/ 1A)
.
12
.
16

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis