Instructions For The Installer; Technical Data; Installing The Appliance; Transportation, Unpacking - Electrolux EUT 11004W Gebrauchsanleitung

54 electrolux

Technical data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
Energy class, according to EU
Standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Weight (kg)

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance
in original packaging, in vertical position
considering the protective warning on
packaging.
After each transportation the appliance
must not be switched on for approx. 4
hours.
Unpack the appliance and check if there
are damages on it. Report possible
damages immediately to the place you
bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure
the parts not to move in the appliance.
Wash the inside of the appliance using
lukewarm water and mild detergent. Use
soft cloth.
After cleaning wipe out the inside of the
appliance.
GB

Instructions for the Installer

(kWh/day)
(kWh/year)
EUT 11004 W
110
91
550
850
612
0,504
184
A+
12
22
0,8
39

Placement

The ambient temperature has an effect on
the energy consumption and proper
operation of the appliance. When placing,
take into consideration that it is practical to
operate the appliance between ambient
temperature limits according to the climate
class that is given in the chart below and
can be found in the data label.
Class of climate
SN
N
ST
T
If the ambient temperature goes below the
lower data the temperature of the cooling
compartment can
prescribed temperature.
If the ambient temperature goes beyond the
upper data this means longer operating
time of the compressor, increasing
temperature in the freezer or increasing
energy consumption.
Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+16 ... + 38 °C
+16 ... + 43 °C
go beyond the