INVENTOR EP-MC78 Bedienungsanleitung Seite 11

Cleaning the air inlet filter
Initially remove the dust bucket then
the filter from the air inlet.
Rinse the filter and dry thoroughly
before repositioning it.
Cleaning the air outlet filter
The air outlet filter is located on the back of the appliance.
1. Press down on the filter cover
latch to remove the filter cover.
3. Rinse the filter and the cover and allow them to dry completely
prior to re-positioning them into the appliance.
Cleaning the HEPA filter:
Open the filter cover on the back and remove the HEPA filter by
pulling the tab on the HEPA filter downwards.
Rinse under running water allow to dry then replace.
2. Remove the air outlet
filter.
11
ΕΝ