INVENTOR EP-BG69 Bedienungsanleitung Seite 7

ASSEMBLY
Remember to always disconnect the appliance from the main
power socket before any assembling or disassembling.
Connecting the hose
• To fit the hose, push the hose end into the
hose socket and turn it clockwise until it
locks into place.
• To remove the hose, hold the hose end and
turn it anticlockwise.
Connecting Tubes and Accessories
1. Insert the hose handle into one end of tubes.
2. Adjust the tubes to your desired length.
• Push forward the switch on the tube then adjust. Release the
switch until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and/or the accessories, firmly hold each
piece and pull apart.
7
ΕΝ