T'nB SPCAMWIFI2 Bedienungsanleitung Seite 39

Wi-Fi Mode Activation
Enable the Wi-Fi :
1 - Put your camera in Video mode
2 - Press the Wi-Fi button
3 - The display will show : «WI-FI connection» the device is
waiting for a Wi-Fi signal. The LED status indicator is on.
Then, to connect your smartphone :
4 - Download application «T'nB Cam» for Android or iPhone.
5 - Enable the Wi-Fi function of your smartphone or tablet
6 - Open the Wi-Fi preferences of your smartphone,
select the signal with name : «T'nB Cam».
7 - Type the password «1234567890» to connect. When
the connection is established the blue LED status
indicator light stays on without blinking and the screen
of the camera turns off.
Bravo, you are connected to Wi-Fi at your camera.
From the application, you can now remotely control your
camera and watch live videos and photos !
Caution : the Wi-Fi function consumes more battery.
Note : It is possible to connect to the camera, only one device at a time.
_Notice_SPCAMWIFI2_2017.indd 39
WiFi
, on the side of your camera
.
Direct activation
of the Wi-Fi mode
WIFI
Réseau :
Application
T'nb Cam
Mot de passe :
T'nB Cam
1234567890
EN
39
09/03/2017 11:09