T'nB SPCAMWIFI2 Bedienungsanleitung Seite 34

Video mode
To record a video, make sure that the camera is in Video mode.
If the Video icon
multiple times until it appears.
To start recording :
Press
while recording
To stop recording :
Press
but no longer blinks: the recording is interrupted
34
_Notice_SPCAMWIFI2_2017.indd 34
VIDEO VIDEO
is not displayed on the LCD screen of your camera, press «MODE»
and release the pressure.The camera beeps and the blue status indicator blinks
and release the pressure.The camera beeps and the blue status indicator is on
09/03/2017 11:09