T'nB SPCAMWIFI2 Bedienungsanleitung Seite 36

Photo mode
To take a photo, make sure that the camera is in Photo mode. If the Photo icon
displayed on the LCD screen of your camera, press «MODE» multiple times until it appears.
To take a photo :
Press
for every captured shot
Select the resolution of your photos :
Your camera can take some shots with resolution up to 5
Megapixels. You have the choice of four possible types of
resolution (Configurations > Resolution).
Take several photos at once :
In «Burst» mode, your camera takes several photos in a
single click. To take a burst of photos, make sure that the
camera is in «Burst» mode (Configurations > Burst). You just
have to select the number of shot that you want for a single
click: 3, 5 or 10 photos.
36
_Notice_SPCAMWIFI2_2017.indd 36
PHOTO
and release the pressure.The camera beeps and the blue status indicator blinks
Indicator of the chosen resolution
Activated «Photo burst»
is not
01347
01347
09/03/2017 11:09