dB Technologies IEM 2200 Bedienungsanleitung Seite 15

Receiver
9V alkaline battery
Power:
6,5 to 8 hours depending upon volume
Battery life:
250 mW / 16 Ohms per channel
Earpiece output:
<1%
Distortion:
40dB @ 1kHz typical
Channel separation:
30 Hz to 15kHz ~ 3dB
Frequency response
105dB typical measured in mono mode
Signal to noise ratio
100dB typical measured in stereo mode
< 2uV for 20dB SINAD
Sensitivity
16 pre-programmed frequencies*
Operating frequency:
Integral ¼ wave whip
Antenna:
a flashing indication on the LCD panel alert the user to
Low battery warning:
Soft mute circuits ensure no loud pops or other noises in
Muting:
situations. Silent shutdown in the event of loss of
System
50 Hz to 15 kHz ± 3dB
Frequency response:
< 1.0%
THD + Noise:
> 100dB nominal
Signal to noise:
ETS 300 422 & ETS 300 445
Compliance:
20
RF.
replace th
low RF