Herunterladen Diese Seite drucken

dB Technologies IEM 2200 Bedienungsanleitung Seite 14

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

dB-technologies's products are fully compliant with the relevant Standard Regulations. In most countries,
nevertheless, wireless systems must be approved for use by the Authorities and may be necessary to obtain a licence
to use it legally. Your local dealer will be able to give you details on wireless system regulations for your area.
Transmitter
Transmitter size:
2 Kg approx./4.5 1bs
Transitter weight:
12 Volts a.c. @ 250mA 50/60 Hz
Power input:
Electronically balanced, Neutrik Combo™ XLR
Inputs:
connectors (pin 2=hot, pin 3=cold)
6.3mm ( ¼") jack sockets (tip=hot, ring= cold)
Link outputs:
0 dBV / 600 Ohms nominal
Sensitivity:
50 Hz to 15kHz ± 3dB
Frequency response:
Distortion:
<1%
Dual adjustment for individual control over left &
Level control:
inputs
Input level bargraph display for each channel.
Metering:
6.3mm and 3.5mm stereo jack sockets and stereo
Monitor output:
Operating frequency:
16 pre-programmed frequencies*
25mW e.r.p. as measured in accordance with ETS300 422
RF output power:
frequency modulation ± 35KHz nominal deviation
Modulation:
Variable ratio compressor
dynamics control:
¼ wave ship
Antenna:
-10°C to +50°C
Temperature range:
19
IEM2200 Technical Specification
Rack-mounting (19"), 1 u (1.75"), 9" deep (max.)
right
volume
control, 250

Werbung

loading